CDAS-2000
|
model cdas-2000 ribbon cable w/ 50-pin connectors, 0.6m (2ft) (for models das-20, das-1700/1800, das |
test equipment accesso |
Avl |
RFQ |
7013-S
|
model 7013-s isolated, 20-ch relay switch w/ screw terminals (for models 7001 and 7002) |
switching and control |
Avl |
RFQ |
7037-D
|
model 7037-d single-pole relay digital i/o card w/ 30 independent switches, 10 independent digital i |
switching and control |
Avl |
RFQ |
CONN-1800HC
|
model 7020-dt extra connector board (for model 7020-d) |
test equipment accesso |
Avl |
RFQ |
7011-C
|
model 7011-c quad 1x10 mux w/ mass-terminated connector (for models 7001 and 7002) |
switching and control |
Avl |
RFQ |
PIO-32I O
|
model pio-32i/o isolated, isa boards w/ 16-ch digital inputs and 16-ch relay outputs |
data acquisition syste |
Avl |
RFQ |
PDISO-8
|
model pdiso-8 isolated, isa board w/ 8 digital inputs and 8 relay outputs |
data acquisition syste |
Avl |
RFQ |
7024-3
|
model 7024-3 low-noise triax cable terminated w/ 2-lug male triax connectors, 0.9m (3ft) (for models |
test equipment accesso |
Avl |
RFQ |
CONN-3160-D1
|
model conn-3160-d1 100-pin to 4x50 pin adapter (for model kpci-3160) |
test equipment accesso |
Avl |
RFQ |
CS-440
|
model cs-440 2-lug female bulkhead connector (for models 220, 263, fixtures) |
test equipment accesso |
Avl |
RFQ |
Model-3730-6 16-High-Density-Matrix-Card
|
the model 3730 is a two-pole, 6 row by 16 column matrix card. it can connect up to six differential instrument channels to any combination of 16 duts (devices under test). any row can be connected to the series 3700 mainframe backplane by using the analog backplane connection relays. this allows for easy matrix column expansion. a matrix of up to 6 rows by 96 columns can be supported within a single model 3706 mainframe (with six model 3730 cards). |
switching and control |
Avl |
RFQ |
2107-4
|
model 2107-4 low-thermal input cables terminated w/ a lemo connector on one end and 4 copper spade l |
test equipment accesso |
Avl |
RFQ |
PIO-SSR-120
|
model pio-ssr-120 120-ch, p24 ssr compatible, isa board w/ digital i/o |
data acquisition syste |
Avl |
RFQ |
K1802
|
model 7156-kit 37-pin, mass-terminated connector |
test equipment accesso |
Avl |
RFQ |
7169-MTC-3
|
model 7169-mtc-3 twisted-pair cable assembly terminated w/ 20-pin connector blocks, 3m (10ft) (for m |
test equipment accesso |
Avl |
RFQ |
CACC-2002
|
model cacc-2002 ribbon cable w/ 50-pin connectors, 1.2m (4ft) (for models erb-24, kpci-pio96, pio-96 |
test equipment accesso |
Avl |
RFQ |
7790
|
model 7037-dt extra connector board (for model 7037-d) |
test equipment accesso |
Avl |
RFQ |
7011-MTR
|
model 7011-mtr bulkhead-mount 96-pin male connector (for models 7011-kit-r, 7011-c, 7012-c, 7013-c, |
test equipment accesso |
Avl |
RFQ |
CS-449
|
model cs-449 interlock connector kit (for model 6517-ilc-3) |
test equipment accesso |
Avl |
RFQ |
KPCI-3160
|
model kpci-3160 96-ch, pci board w/ parallel digital i/o and a mass-terminated 100-pin connector |
data acquisition syste |
Avl |
RFQ |
CAB-1803 S
|
model cab-1803/s shielded cable w/ 100-pin connectors, 3m (10ft) (for models das-1700/1800, kpci-180 |
test equipment accesso |
Avl |
RFQ |
7709-308A
|
model s1803 shielded cable w/ db37 connectors, 1.2m (4.5ft) |
test equipment accesso |
Avl |
RFQ |
Model-7705-40-Ch-Single-Pole-Control-Module-for-Models-2700-2701-and-275
|
the model 7705 plug-in module offers 40 channels of independent switching. these channels are designed to control power to the dut and switching loads. they can also directly control light indicators, relays, etc. |
multimeters |
Avl |
RFQ |
KPXI-CON-PM-1 8G-PLUS
|
model kpxi-con-pm-1.8g-plus 3u pentium m cpu module with pentium m 1.8ghz cpu, 2gb memory, 80gb hard |
pci extensions for ins |
Avl |
RFQ |
3723
|
model 3723 dual 1+30, high speed, reed relay multiplexer card |
switching and control |
Avl |
RFQ |
7078-TRX-TBC
|
model 7078-trx-tbc 3-lug female triax bulkhead connector w/cap |
test equipment accesso |
Avl |
RFQ |
Model-3723-Dual-1 30-High-Speed-Reed-Relay-Multiplexer-Card
|
the model 3723 offers two independent banks of high speed 1x30 two-pole multiplexers that are ideal for high speed scanning applications. the two banks can automatically be connected to the series 3700 mainframe backplane and optional dmm through the analog backplane connection relays. this connection allows the mainframe to reconfigure the model 3723 as a single 1x60 twopole multiplexer or as a single 1x120 single-pole multiplexer. it also enables card-to-card expansion for even larger configurations. |
switching and control |
Avl |
RFQ |
7036
|
model 7036 single-pole relay card w/ 40 independent switches and a mass-terminated 96-pin connector |
switching and control |
Avl |
RFQ |
Model-CAB-SSR-Ribbon-Cable-0 9m-3ft-for-Models-PIO-SS
|
the cab-ssr is a 3 foot ribbon cable that connects a pb-24sm baseboard to one of the 50-pin headers on a pio-ssr series board or kpci-pio96. |
test equipmentaccessor |
Avl |
RFQ |
CAB-1800 S
|
model cab-1800/s shielded cable w/ 100-pin connectors, 0.5m (1.5ft) (for models das-1700/1800, kpci- |
test equipment accesso |
Avl |
RFQ |
SC-22
|
model sc-22 low-noise triax cable without connectors, sold by the foot |
test equipment accesso |
Avl |
RFQ |
Model-KPXI-RDI-8-16-8-Channel-Relay-Output-and-16-Isolated-Digital-Input-PXI-Module
|
isolated digital communication is one of the most common requirements of a production test system because of the need to communicate with handlers, binning equipment, and user controls. keithley's digital i/o modules can also interact with racks of instruments to trigger events, start readings, and collect pass/fail results. digital triggering and response enables fast and reliable test results that are not dependent on the communication bus in use. for hybrid test applications using smart instruments and digital communication techniques, tests can be run with instruments on gpib, lxi, usb, or a serial bus without changing system performance. the model kpxi-rdi-8-16 combines eight general purpose relay outputs with 16 isolated digital inputs. this module can be used to handle a variety of ac and dc signals with improved reliability. the eight relays are rated to 120vac or 24vdc to include a variety of power switching applications. all the relays are nonlatching, form c, and the status of each relay output can be read back through software commands. the kdio-drvr driver package offers example programs, such as a startup application that performs basic functions and verifies board communication. also included is code creator, which lets users program with drop down menus and then displays the equivalent code in c. |
pci extensions for ins |
Avl |
RFQ |
2500INT-FC PC
|
model 2500int-fc/pc fc/pc connector (for model 2500int-x) |
test equipment accesso |
Avl |
RFQ |
CAB-1801 S
|
model cab-1801/s shielded cable w/ 100-pin connectors, 0.9m (3ft) (for models das-1700/1800, kpci-18 |
test equipment accesso |
Avl |
RFQ |
S1803
|
model 213-con analog output connector (for model 213) |
test equipment accesso |
Avl |
RFQ |
Model-7013-C-Isolated-20-Ch-Relay-Switch-w Mass-Terminated-Connector-for-Models-7001-and-700
|
NA |
switching and control |
Avl |
RFQ |
237-ALG-2
|
model 237-alg-2 low-noise triax input cable terminated w/ a 3-slot male triax connector on one end a |
test equipment accesso |
Avl |
RFQ |
7019-C
|
model 7019-c 6-wire ohms matrix card w/ mass-terminated 96-pin connector (for models 7001 and 7002) |
switching and control |
Avl |
RFQ |
7024-10
|
model 7024-10 low-noise triax cable terminated w/ 2-lug male triax connectors, 3m (10ft) (for models |
test equipment accesso |
Avl |
RFQ |
7015-C
|
model 7015-c quad 1x10 solid-state mux card w/ mass-terminated 96-pin connector (for models 7001 and |
switching and control |
Avl |
RFQ |
7789
|
model 7789 d-shell kit w/ 50-pin and 25-pin connectors |
test equipment accesso |
Avl |
RFQ |
CA-126-1
|
model ca-126-1 db25 male to db25 female, digital i/o cable, 1.5m (5ft) (for model 213) |
test equipment accesso |
Avl |
RFQ |
7078-KIT
|
model 7078-kit connector kit, 38-pin plug assembly w/ strain relief and 40 contacts (for models 7071 |
test equipment accesso |
Avl |
RFQ |
KPXI-CON-CM-1 3G
|
model kpxi-con-cm-1.3g 3u pxi system control module with celeron m 1.3ghz cpu, 512mb ram, 40gb hard |
pci extensions for ins |
Avl |
RFQ |
CS-1053
|
model cs-1053 male to male, 3 lug triax connector (for model 2500, 6517a, 236, 237, 238) |
test equipment accesso |
Avl |
RFQ |
CS-751
|
model cs-751 female to female, 3 lug triax connector (for model 2500, 6517a, 236, 237, 238) |
test equipment accesso |
Avl |
RFQ |
C1800
|
model c1800 ribbon cable w/ female 37-pin d-sub connectors, 0.45 m (1.5ft) (for many plug-in board p |
test equipment accesso |
Avl |
RFQ |
213-CON
|
conn,box mt,rcpt |
test equipment accesso |
Avl |
RFQ |
CS-400
|
model cs-400 db25 male solder cup (for models 213, c126-1 cable) |
test equipment accesso |
Avl |
RFQ |
7006-1
|
model 7006-1 single shielded gpib cable, one feed through and one straight on connector, 1m (3.3 ft) |
ieee-488 (gpib) soluti |
Avl |
RFQ |
CS-846
|
model cs-846 eight-position connector with screw terminals for connection to test leads |
test equipment accesso |
Avl |
RFQ |
4803
|
model 4803 low-noise coax cable kit w/ 15m (50ft) of low-noise cable, 10 male bnc connectors, 5 fema |
test equipment accesso |
Avl |
RFQ |
2500INT-FC APC
|
connect in line rcpt |
test equipment accesso |
Avl |
RFQ |
CS-631
|
model cs-631 3-lug male triax cable mount connector (for model sc-22 cable) |
test equipment accesso |
Avl |
RFQ |
S1600
|
model s1600 shielded cable w/ 37-pin connectors, 0.5m (1.5ft) (for models das-16, das-1600/1400/1200 |
test equipment accesso |
Avl |
RFQ |
7703-306A
|
model 7703-306a db50 male connector kit (solder cup) with shell |
test equipment accesso |
Avl |
RFQ |
2107-30
|
model 2107-30 low-thermal input cable terminated w/ a lemo connector on one end and 4 copper spade l |
test equipment accesso |
Avl |
RFQ |
7013-C
|
model 7013-c isolated, 20-ch relay switch w/ mass-terminated connector (for models 7001 and 7002) |
switching and control |
Avl |
RFQ |
7006-2
|
model 7006-2 single shielded gpib cable, one feed through and one straight on connector, 2m (6.6 ft) |
ieee-488 (gpib) soluti |
Avl |
RFQ |
7156-KIT
|
model cs-458 interlock connector kit |
test equipment accesso |
Avl |
RFQ |
1507A
|
model 1507a low-thermal input cable terminated w/ a model 1486 connector on one end and 2 copper spa |
test equipment accesso |
Avl |
RFQ |
Model-7071-8x12-General-Purpose-Matrix-Card-for-Models-707A-and-708
|
the model 7071 general purpose matrix card is an 8x12 configuration that switches high, low, and guard at each of the 96 relay crosspoints. the eight rows are connected automatically to the general purpose analog backplane when the matrix card is installed into the 707a and 708a mainframe. this allows for easy expansion in 12 column increments and eliminates the requirement for wiring between cards. |
switching and control |
Avl |
RFQ |
7012-C
|
model 7012-c 4x10 matrix card w/ mass-terminated connector (for models 7001 and 7002) |
switching and control |
Avl |
RFQ |
7015-S
|
model 7015-s quad 1x10 solid-state mux card w/ detachable screw terminal connector (for models 7001 |
switching and control |
Avl |
RFQ |
S1805
|
model 2500int-sma sma connector (for model 2500int-x) |
test equipment accesso |
Avl |
RFQ |
Model-PIO-SSR-120-120-Ch-P24-SSR-Compatible-ISA-Board-w Digital-I O
|
the pio-12, pio-24, pio-96j, and pio-ssr-120 allow up to 120 ttl/nmos/cmos-compatible digital i/o lines to be monitored or controlled by a computer with an isa bus slot. these boards are ideal for controlling relays and process automation. with the pio-24, pio-96j, and pio-ssr-120 you can directly drive solid-state relays. the pio-12 and pio-24 also provide access to the pc?s interrupt input and enable lines, and include connections to the pc's power supplies (¦5v, ¦12v). by using external solid-state relays, the pio-ssr-120 can control and sense voltages up to 280vac and vdc while maintaining 4000vrms of isolation. |
data acquisition syste |
Avl |
RFQ |
7011-KIT-R
|
model 7011-kit-r female 96-pin connector kit (for models 7011-c, 7012-c, 7013-c, 7015-c, 7018-c) |
test equipment accesso |
Avl |
RFQ |
237-TRX-TBC
|
model 237-trx-tbc 3-lug female triax bulkhead connector (for models 7072, 7072-hv, 7172, 7078-trx ca |
test equipment accesso |
Avl |
RFQ |
KPXI-RDI-8-16
|
model kpxi-rdi-8-16 8-channel relay output and 16 isolated digital input pxi module |
pci extensions for ins |
Avl |
RFQ |
KPXI-CON-PM-1 8G
|
model kpxi-con-pm-1.8g 3u pxi system control module with pentium m 1.8ghz cpu, 512mb ram, 40gb hard |
pci extensions for ins |
Avl |
RFQ |
Model-3740-32-channel-Isolated-Switch-Card
|
the model 3740 offers 28 general-purpose form c channels that are ideal for routing power or other control devices. for higher power applications of up to 7a, four additional high current form a channels are provided. |
switching and control |
Avl |
RFQ |
KPXI-CON-PXIREM
|
model kpxi-con-pxirem pci-to-pxi extension interface module for pxi chassis |
pci extensions for ins |
Avl |
RFQ |
7037-DT
|
model 2500int-fc/apc fc/apc connector |
test equipment accesso |
Avl |
RFQ |
7025-10
|
model 7025-10 low-noise triax input cable w/ 1 unterminated end and 1 end terminated w/ a 2-lug male |
test equipment accesso |
Avl |
RFQ |
7018-C
|
model 7018-c dual 1x14 mux card w/ mass-terminated 96-pin connector (for models 7001 and 7002) |
switching and control |
Avl |
RFQ |
CACC-2006
|
model cacc-2006 ribbon cable w/ 50-pin connectors, 2.4m (8ft) (for models erb-24, kpci-pio96, pio-96 |
test equipment accesso |
Avl |
RFQ |
CAB-1802 S
|
model cab-1802/s shielded cable w/ 100-pin connectors, 1.8m (6ft) (for models das-1700/1800, kpci-18 |
test equipment accesso |
Avl |
RFQ |
Model-7013-S-Isolated-20-Ch-Relay-Switch-w Screw-Terminals-for-Models-7001-and-700
|
NA |
switching and control |
Avl |
RFQ |
CACC-2000
|
model cacc-2000 ribbon cable w/ 50-pin connectors, 0.6m (2ft) (for models erb-24, kpci-pio96, pio-96 |
test equipment accesso |
Avl |
RFQ |
2182-KIT
|
model 2182-kit low-thermal (lemo) connector w/ strain relief (for model 2182) |
test equipment accesso |
Avl |
RFQ |
CS-458
|
straight plug cad od alum |
test equipment accesso |
Avl |
RFQ |
248-SHV
|
model 248-shv high-voltage coax cable terminated w/ an shv female connector on both ends, 3m (10ft) |
test equipment accesso |
Avl |
RFQ |
7020-DT
|
boot rubber/nut tall bushing red |
test equipment accesso |
Avl |
RFQ |
CS-970
|
model cs-970 high-voltage bulkhead connector (for models 248, 248-shv cable) |
test equipment accesso |
Avl |
RFQ |
7164-KIT
|
model 7164-kit 50-pin, mass-terminated connector (for models 7164-d, 7164-m, 7164-mtr) |
test equipment accesso |
Avl |
RFQ |
2500INT-SMA
|
boot rubber/nut short bushing bk |
test equipment accesso |
Avl |
RFQ |
2000-MTC-2
|
model 2000-mtc-2 cable assembly w/ a 44-pin connector and one unterminated end, 2m (6.6ft) (for mode |
test equipment accesso |
Avl |
RFQ |
CAB-SSR
|
model cab-ssr ribbon cable, 0.9m (3ft) (for models pio-ssr) |
test equipmentaccessor |
Avl |
RFQ |
7018-S
|
model 7018-s dual 1x14 mux card w/ detachable screw terminal connector (for models 7001 and 7002) |
switching and control |
Avl |
RFQ |
CAB-1800
|
model cab-1800 cable w/ 100-pin connectors, 0.5m (1.5ft) (for models das-1700/1800, kpci-3160, kcpi- |
test equipment accesso |
Avl |
RFQ |