| MRC | Criteria | Characteristic |
|---|
| BTTB | SPINDLE SPEED RANGE IN RPM | 425.0 TO 4000.0 |
| BNQL | MAIN DRIVE TYPE | ELECTRIC MOTOR |
| BNRK | SPINDLE SOCKET TAPER SIZE | 2 MORSE |
| BNRW | BASE WORKING SURFACE LENGTH | 10.000 INCHES NOMINAL |
| BNRX | BASE WORKING SURFACE WIDTH | 8.000 INCHES NOMINAL |
| BNRZ | COLUMN TYPE | ROUND |
| ACDC | CURRENT TYPE | AC |
| BNSF | BASE WORKING SURFACE TYPE | SLOTTED |
| BNSG | BASE WORKING SURFACE SHAPE | RECTANGULAR |
| BNSH | BASE WORKING SURFACE AREA | ANY ACCEPTABLE |
| BNSL | BASE WORKING SURFACE MOUNTING LOCATION | BASE |
| BNSM | MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO BASE WORKING SURFACE | 44.000 INCHES |
| BNSN | UPPER WORKING SURFACE TYPE | SLOTTED |
| BNSP | UPPER WORKING SURFACE SHAPE | RECTANGULAR |
| AKSQ | FUNGUS RESISTANT TREATMENT | NOT INCLUDED |
| BNSX | UPPER WORKING SURFACE VERTICAL ADJUSTMENT | 38.000 INCHES NOMINAL |
| BNSY | SWIVEL ADJUSTMENT IN DEG | 360.0 |
| ELEC | VOLTAGE IN VOLTS | 230.0 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND A STYLE AND 1 SIZE |
| BPSX | HEAD VERTICAL ADJUSTMENT | 44.000 INCHES NOMINAL |
| SR-1 | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | A-A-59457A-3469 |
| FAAZ | PHASE | SINGLE |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | BELT V NSN 3030-00-528-4754 1; CORD 15 FT 1; CORD GRIP PLUG POLARIZED 3 POLE 1; DRILL CHUCK 1/2 IN. WITH A NO. 2 MORSE TAPER SHANK 1 |
| BWJN | UPPER WORKING SURFACE MOUNTING LOCATION | COLUMN |
| BWJP | MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO UPPER WORKING SURFACE | 38.000 INCHES |
| BCRH | SPINDLE QUANTITY | 1 |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | A-A-59457 |
| ALYE | ROTATION REVERSIBILITY FEATURE | NOT INCLUDED |
| AQDD | FEED TYPE | HAND |
| SR-1 | MANUFACTURERS CODE | 58536 |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| BNRL | SPINDLE TRAVEL DISTANCE | 4.000 INCHES NOMINAL |
| BNRY | DRILLING CAPABILITY | 1/2 IN. DRILLING CAPACITY IN CAST IRON |
| BNSD | DISTANCE FROM SPINDLE CENTER TO COLUMN | 7.500 INCHES NOMINAL |
| BNSK | BASE WORKING SURFACE VERTICAL ADJUSTMENT | ANY ACCEPTABLE |
| BNSS | UPPER WORKING SURFACE LENGTH | 11.000 INCHES NOMINAL |
| BNST | UPPER WORKING SURFACE WIDTH | 10.000 INCHES NOMINAL |
| BNSW | UPPER WORKING SURFACE ADJUSTMENT FEATURE | INCLUDED |
| BNSZ | TILT ADJUSTMENT DIRECTION AND ANGLE IN DEG | 90.0 LEFT 90.0 RIGHT |
| AAXX | MOUNTING TYPE | FLOOR |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| BQLR | SPINDLE TYPE | TAPERED SOCKET |
| BTSZ | SPINDLE SPEED QUANTITY | 4 |
| ALBH | RADIO INTERFERENCE SHIELDING | NOT PROVIDED |
| AJGD | HEAD TYPE | RADIAL SWINGING/SLIDING |
