Using the Request for Quote (RFQ) form provided on this page, you can request competitive procurement options on part number 200F with rapid responses always offered by our staff. To ensure that you locate and procure exactly what you need with ease, we list parts with as much information as we can. For example, part number 200F It is listed as Drilling Machine Upright. component manufactured by New Philadelphia Fan Co Buffalo, specifically under CAGE Code 09519. It is also accompanied by the NSN 3413011433610 for ease of organization, the first digits of the NSN indicating that the part belongs to FSC 3413 Drilling and Tapping Machines.
Characteristics Data of NSN 3413-01-143-3610, 3413011433610
| MRC | Criteria | Characteristic |
|---|---|---|
| ALYE | ROTATION REVERSIBILITY FEATURE | NOT INCLUDED |
| BTTB | SPINDLE SPEED RANGE IN RPM | 190.0 TO 1200.0 |
| AJGD | HEAD TYPE | FIXED |
| BNQL | MAIN DRIVE TYPE | ELECTRIC MOTOR |
| BNRK | SPINDLE SOCKET TAPER SIZE | 3 MORSE |
| BNRL | SPINDLE TRAVEL DISTANCE | 6.000 INCHES NOMINAL |
| BNRX | BASE WORKING SURFACE WIDTH | 22.000 INCHES NOMINAL |
| BNRY | DRILLING CAPABILITY | 1-1/4 IN. IN CAST IRON |
| BNRZ | COLUMN TYPE | ROUND |
| BNSD | DISTANCE FROM SPINDLE CENTER TO COLUMN | 10.250 INCHES NOMINAL |
| BNSF | BASE WORKING SURFACE TYPE | PLAIN |
| BNSG | BASE WORKING SURFACE SHAPE | RECTANGULAR |
| BNSL | BASE WORKING SURFACE MOUNTING LOCATION | COLUMN |
| BNSM | MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO BASE WORKING SURFACE | 41.000 INCHES |
| BNSN | UPPER WORKING SURFACE TYPE | PLAIN W/COOLANT TROUGH |
| AKSQ | FUNGUS RESISTANT TREATMENT | NOT INCLUDED |
| BNSX | UPPER WORKING SURFACE VERTICAL ADJUSTMENT | 33.500 INCHES NOMINAL |
| BNSY | SWIVEL ADJUSTMENT IN DEG | 360.0 |
| BNSZ | TILT ADJUSTMENT DIRECTION AND ANGLE IN DEG | ANY ACCEPTABLE |
| ACDC | CURRENT TYPE | AC |
| FAAZ | PHASE | THREE |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | MAGNETIC STARTER 1 |
| ELEC | VOLTAGE IN VOLTS | 230.0 |
| AQDD | FEED TYPE | HAND |
| BWJN | UPPER WORKING SURFACE MOUNTING LOCATION | COLUMN |
| BWJP | MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO UPPER WORKING SURFACE | 33.500 INCHES |
| BNRW | BASE WORKING SURFACE LENGTH | 20.000 INCHES NOMINAL |
| BNSP | UPPER WORKING SURFACE SHAPE | RECTANGULAR |
| BNSS | UPPER WORKING SURFACE LENGTH | 16.000 INCHES NOMINAL |
| BNST | UPPER WORKING SURFACE WIDTH | 18.000 INCHES NOMINAL |
| BNSW | UPPER WORKING SURFACE ADJUSTMENT FEATURE | INCLUDED |
| BQLR | SPINDLE TYPE | TAPERED SOCKET |
| BTSZ | SPINDLE SPEED QUANTITY | ANY ACCEPTABLE |
| AAXX | MOUNTING TYPE | FLOOR |
| ALBH | RADIO INTERFERENCE SHIELDING | NOT PROVIDED |
| BCRH | SPINDLE QUANTITY | 1 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
