| MRC | Criteria | Characteristic |
|---|
| ALYE | ROTATION REVERSIBILITY FEATURE | NOT INCLUDED |
| BTTB | SPINDLE SPEED RANGE IN RPM | 322.000 TO 3200.000 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | BNSF,BNSG,BHSH,BNSJ,BNSK,BNSL,BNSM,BNSN,BNSP,BNSQ,BNSS,BNST,BNSW,BNSY,BNSZ,BWJN,BWJP,BNQL,ASHK,ACDC,ELEC,FREQ,FAAZ,ALYE,ALBH,AKSQ |
| BNQL | MAIN DRIVE TYPE | ELECTRIC MOTOR |
| BNRY | DRILLING CAPABILITY | 1/2 IN. IN MILD STEEL,5/8 IN. IN CAST IRON |
| BNRZ | COLUMN TYPE | ROUND |
| BNSD | DISTANCE FROM SPINDLE CENTER TO COLUMN | 7.250 INCHES NOMINAL |
| BNSF | BASE WORKING SURFACE TYPE | PLAIN |
| ACDC | CURRENT TYPE | AC |
| BNSG | BASE WORKING SURFACE SHAPE | ROUND |
| BNSH | BASE WORKING SURFACE AREA | ANY ACCEPTABLE |
| BNSJ | BASE WORKING SURFACE DIAMETER | 10.500 INCHES NOMINAL |
| BNSK | BASE WORKING SURFACE VERTICAL ADJUSTMENT | 20.500 INCHES NOMINAL |
| BNSL | BASE WORKING SURFACE MOUNTING LOCATION | BASE |
| BNSM | MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO BASE WORKING SURFACE | 36.000 INCHES |
| BNSN | UPPER WORKING SURFACE TYPE | PLAIN W/ANGLE BRACKET |
| BNSP | UPPER WORKING SURFACE SHAPE | SQUARE |
| BNSQ | UPPER WORKING SURFACE AREA | ANY ACCEPTABLE |
| BNSS | UPPER WORKING SURFACE LENGTH | 11.000 INCHES NOMINAL |
| AKSQ | FUNGUS RESISTANT TREATMENT | NOT INCLUDED |
| BNSW | UPPER WORKING SURFACE ADJUSTMENT FEATURE | INCLUDED |
| BNSY | SWIVEL ADJUSTMENT IN DEG | 360.000 |
| ELEC | VOLTAGE IN VOLTS | 220.0 440.0 |
| SR-5 | MANUFACTURERS CODE | 12356 |
| BWJN | UPPER WORKING SURFACE MOUNTING LOCATION | COLUMN |
| BWJP | MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO UPPER WORKING SURFACE | 12.000 INCHES |
| BCRH | SPINDLE QUANTITY | 1 |
| SR-5 | THE MANUFACTURERS DATA | |
| FAAZ | PHASE | THREE |
| AQDD | FEED TYPE | HAND |
| SR-5 | DESIGN CONTROL REFERENCE | C014-3000FV |
| BNRK | SPINDLE SOCKET TAPER SIZE | NO. 2 MORSE TAPED |
| BNRL | SPINDLE TRAVEL DISTANCE | 6.625 INCHES NOMINAL |
| BNST | UPPER WORKING SURFACE WIDTH | 11.000 INCHES NOMINAL |
| BNSX | UPPER WORKING SURFACE VERTICAL ADJUSTMENT | 9.000 INCHES NOMINAL |
| BNSZ | TILT ADJUSTMENT DIRECTION AND ANGLE IN DEG | 90.0 LEFT 90.0 RIGHT |
| BPSX | HEAD VERTICAL ADJUSTMENT | 5.000 INCHES NOMINAL |
| AAXX | MOUNTING TYPE | FLOOR |
| BQLR | SPINDLE TYPE | TAPERED SOCKET |
| BTSZ | SPINDLE SPEED QUANTITY | 6 |
| ALBH | RADIO INTERFERENCE SHIELDING | NOT PROVIDED |
| FREQ | FREQUENCY IN HERTZ | 60.000 |
| AJGD | HEAD TYPE | SLIDING |
