| MRC | Criteria | Characteristic |
|---|
| BNQL | MAIN DRIVE TYPE | ELECTRIC MOTOR |
| BNRL | SPINDLE TRAVEL DISTANCE | 6.000 INCHES NOMINAL |
| BNRW | BASE WORKING SURFACE LENGTH | 16.250 INCHES NOMINAL |
| BNRX | BASE WORKING SURFACE WIDTH | 13.500 INCHES NOMINAL |
| BNRZ | COLUMN TYPE | ROUND |
| BNSF | BASE WORKING SURFACE TYPE | TEE SLOTTED |
| BNSG | BASE WORKING SURFACE SHAPE | RECTANGULAR |
| BNSH | BASE WORKING SURFACE AREA | 219.000 SQUARE INCHES |
| BNSL | BASE WORKING SURFACE MOUNTING LOCATION | COLUMN |
| BNSM | MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO BASE WORKING SURFACE | 44.500 INCHES |
| BNSP | UPPER WORKING SURFACE SHAPE | RECTANGULAR |
| BNSQ | UPPER WORKING SURFACE AREA | 288.000 SQUARE INCHES |
| AKSQ | FUNGUS RESISTANT TREATMENT | NOT INCLUDED |
| BNSS | UPPER WORKING SURFACE LENGTH | 18.000 INCHES NOMINAL |
| BNSX | UPPER WORKING SURFACE VERTICAL ADJUSTMENT | 34.250 INCHES NOMINAL |
| BNSZ | TILT ADJUSTMENT DIRECTION AND ANGLE IN DEG | 90.0 LEFT |
| ELEC | VOLTAGE IN VOLTS | 230.0 OR 460.0 |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | RAISING MECHANISM FOR HEAD OR TABLE 1,SELF-LOCKING DEPTH STOP 1,DEPTH GAGE 1,BELT GUARD 1,BELT AND MOTOR PULLEY (SPECIFY BORE) 1,SAFETY COLLAR FOR HEAD 1,MOTOR 1,CONTROLS 1 |
| FEAT | SPECIAL FEATURES | 24 VOLT PUSH BUTTON STATION,MAGNETIC STARTER,TRANSFORMER AND 3-LEG OVERLOAD PROTECTION (LVC),MEIGHT BALL BEARINGS REGIDLY SUPPORT SPINDLE ON SPEED REDUCTION MODELS. TEN-SPLINE SPINDLE IS 3/4 IN. IN DIAMETER FOR GREATER TORQUE TRANSMISSION. LARGE 2 3/8 IN. DIAMETER QUILL IS SUPPORTED BY THREE PRECISION BORED LANDS IN HEAD,PROVIDING EXTRA SMOOTH TRAVEL. LONG COLUMNS PROVIDE EXTRA BIG CAPACITY FOR LARGE WORK. |
| BWJN | UPPER WORKING SURFACE MOUNTING LOCATION | COLUMN |
| BWJP | MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO UPPER WORKING SURFACE | 34.250 INCHES |
| ALYE | ROTATION REVERSIBILITY FEATURE | NOT INCLUDED |
| AQDD | FEED TYPE | HAND |
| FAAZ | PHASE | THREE |
| BNRK | SPINDLE SOCKET TAPER SIZE | 3 MORSE |
| BNRY | DRILLING CAPABILITY | 1 IN. DRILLING CAPACITY IN MILD STEEL |
| BNSD | DISTANCE FROM SPINDLE CENTER TO COLUMN | 11.875 INCHES NOMINAL |
| BNSN | UPPER WORKING SURFACE TYPE | SLOTTED W/CENTER HOLE |
| BNST | UPPER WORKING SURFACE WIDTH | 16.000 INCHES NOMINAL |
| BNSW | UPPER WORKING SURFACE ADJUSTMENT FEATURE | INCLUDED |
| AAXX | MOUNTING TYPE | FLOOR |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| ACDC | CURRENT TYPE | AC |
| BQLR | SPINDLE TYPE | TAPERED SOCKET |
| BTSZ | SPINDLE SPEED QUANTITY | 8 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 125.0 TO 1400.0 |
| ALBH | RADIO INTERFERENCE SHIELDING | NOT PROVIDED |
| BCRH | SPINDLE QUANTITY | 1 |
| AJGD | HEAD TYPE | FIXED |
