| MRC | Criteria | Characteristic |
|---|
| AAQL | BODY STYLE | SHOULDER |
| AAXC | CONCENTRIC HOLE DIAMETER | 0.155 INCHES MINIMUM AND 0.161 INCHES MAXIMUM |
| ACLK | FIRST END THREAD CLASS | 3A |
| ACMR | SECOND END THREAD CLASS | 3B |
| ATKZ | FIRST END THREAD LENGTH | 0.640 INCHES MINIMUM AND 0.670 INCHES MAXIMUM |
| BBKK | DISTANCE FROM BOLT END TO HOLE CENTER | 0.256 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| BBKM | SECOND DIAMETER FROM WRENCHING FEATURE | 0.534 INCHES MINIMUM AND 0.544 INCHES MAXIMUM |
| BBKR | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 3.850 INCHES MINIMUM AND 3.865 INCHES MAXIMUM |
| BBLB | DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 4.140 INCHES MINIMUM AND 4.185 INCHES MAXIMUM |
| BBLD | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 4.510 INCHES MINIMUM AND 4.545 INCHES MAXIMUM |
| CQKK | FIRST END THREAD QUANTITY PER INCH | 12 |
| CQYM | FIRST END NOMINAL THREAD SIZE | 1.000 INCHES |
| CRNB | SECOND END NOMINAL THREAD SIZE | 0.250 INCHES |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMIUM |
| TEST | TEST DATA DOCUMENT | 36659-LC+72-1076 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTIN |
| AAWX | CONCENTRIC HOLE DEPTH | 6.100 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 4.800 INCHES MINIMUM AND 4.845 INCHES MAXIMUM |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| ACMS | SECOND END THREAD DIRECTION | RIGHT-HAND |
| ADDV | COTTER PIN HOLE DIAMETER | 0.155 INCHES MINIMUM AND 0.162 INCHES MAXIMUM |
| ATLF | SECOND END THREAD LENGTH | 0.180 INCHES NOMINAL |
| BBKL | FIRST DIAMETER FROM WRENCHING FEATURE | 0.748 INCHES MINIMUM AND 0.749 INCHES MAXIMUM |
| BBKS | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER | 4.035 INCHES MINIMUM AND 4.050 INCHES MAXIMUM |
| BBKY | FIRST RADIAL FLUID HOLE DIAMETER | 0.124 INCHES MINIMUM AND 0.129 INCHES MAXIMUM |
| BBLF | WRENCHING FEATURE HEIGHT | 0.250 INCHES NOMINAL |
| CQBC | MINIMUM TENSILE STRENGTH | 270000 POUNDS PER SQUARE INCH |
| CQMM | FIRST END THREAD SERIES DESIGNATOR | UNF |
| CRMX | SECOND END THREAD QUANTITY PER INCH | 28 |
| CRPF | SECOND END THREAD SERIES DESIGNATOR | UNF |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | C-05-1190 FSCM 36659 MFR REF SINGLE MATERIAL RESPONSE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | LC+77-1036 FSCM 36659 MFR REF 1ST TREATMENT RESPONSE AND LC+772035 FSCM 36659 MFR REF 2ND TREATMENT RESPONSE |
