| MRC | Criteria | Characteristic |
|---|
| AAPN | SECTION QUANTITY | 1 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.4365 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1248 INCHES MINIMUM AND 0.1251 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0570 NOMINAL MILS AND 0.0670 NOMINAL CENTIMETERS |
| AEDX | SHAFT STYLE | ROUND |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL |
| AEFL | MAXIMUM RUNNING TORQUE | 0.05 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 80.00 INCH-OUNCES |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.002 INCHES |
| APXH | TERMINAL LOCATION | REAR END |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 150.0 SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 7 OCLOCK ALL PRIMARIES |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 0.495 NOMINAL MILS AND 0.505 NOMINAL CENTIMETERS |
| ADAQ | BODY LENGTH | 0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 0.4950 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 0.075 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.004 INCHES |
| AEFZ | SHAFT RUNOUT | 0.002 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CBME | CUBIC MEASURE | 0.123 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00/+1.00 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | 20.0/+20.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 7TH SECONDARY QUALITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -5.0/+5.0 OHMS SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 5000.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TURRET |
