| MRC | Criteria | Characteristic |
|---|
| SR-1 | SPEC/STD CONTROLLING DATA | |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 7200.0 MINIMUM AND 16200.0 MAXIMUM |
| SR-1 | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | RJ22CW501 |
| SR-1 | MANUFACTURERS CODE | 81349 |
| ABJT | TERMINAL LENGTH | 0.172 INCHES MINIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| AAPN | SECTION QUANTITY | 1 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| ABWV | SHAFT DIAMETER | 0.078 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| APXH | TERMINAL LOCATION | REAR END |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 500.000 OHMS SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| ADAT | BODY WIDTH | 0.205 INCHES NOMINAL |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -250.0 TO 250.0 SINGLE SECTION |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILR22097-3 |
| ABXF | SHAFT LENGTH | 0.045 INCHES MAXIMUM |
| AXGY | MOUNTING METHOD | TERMINAL |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| TEST | TEST DATA DOCUMENT | 81349-MILR22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING |
| ADAQ | BODY LENGTH | 0.540 INCHES MAXIMUM |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-22097/3 GOVERNMENT SPECIFICATION |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 7200.0 MINIMUM AND 16200.0 MAXIMUM |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.520 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.500 INCHES NOMINAL |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
