| MRC | Criteria | Characteristic |
|---|
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| APXH | TERMINAL LOCATION | REAR END |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| ADAQ | BODY LENGTH | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.420 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.050 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| AAPN | SECTION QUANTITY | 1 |
| CBME | CUBIC MEASURE | 0.030 CUBIC INCHES |
| SR-1 | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | RJ24FW104 |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-R-22097/4 |
| SR-1 | MANUFACTURERS CODE | 81349 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| AAQL | BODY STYLE | RECTANGULAR |
| ABJT | TERMINAL LENGTH | 0.172 INCHES MINIMUM |
| ADAT | BODY WIDTH | 0.140 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 5400.0 MINIMUM AND 10800.0 MAXIMUM |
| AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABXF | SHAFT LENGTH | 0.080 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AXGY | MOUNTING METHOD | TERMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 100.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 5400.0 MINIMUM AND 10800.0 MAXIMUM |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.095 NOMINAL MILS AND 0.105 NOMINAL CENTIMETERS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 7TH SECONDARY QUALITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTI |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-22097/4 GOVERNMENT SPECIFICATION |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
