| MRC | Criteria | Characteristic |
|---|
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILR27208-3 |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-27208/3 GOVERNMENT SPECIFICATION |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.8 FREE AIR SINGLE SECTION |
| AAPN | SECTION QUANTITY | 1 |
| ABHP | OVERALL LENGTH | 1.254 INCHES MINIMUM AND 1.346 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.280 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.280 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 6120.0 MINIMUM AND 9720.0 MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 8.00 INCH-OUNCES |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 6120.0 MINIMUM AND 9720.0 MAXIMUM |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0/+50.0 SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-27208 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTI |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 200.000 OHMS SINGLE SECTION |
| APXH | TERMINAL LOCATION | REAR END |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| SR-1 | MANUFACTURERS CODE | 81349 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| SR-1 | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | RT11C2L201 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| ABTB | MOUNTING HOLE DIAMETER | 0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.036 INCHES MINIMUM AND 0.064 INCHES MAXIMUM |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.250 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.250 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
