| MRC | Criteria | Characteristic |
|---|
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 3.370 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0580 INCHES MINIMUM AND 0.0680 INCHES MAXIMUM |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| ABXF | SHAFT LENGTH | 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 1.062 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL |
| AEFL | MAXIMUM RUNNING TORQUE | 1.00 INCH-OUNCES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.0015 INCHES |
| APXH | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0/+3.0 ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 ALL SECTIONS |
| FEAT | SPECIAL FEATURES | LUBRICATION ORIFICE FLUSH WITH REAR OF POT |
| AAPN | SECTION QUANTITY | 2 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.6240 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.624 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ABWV | SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 2.995 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 0.8700 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.750 INCHES NOMINAL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 1.20 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 128.00 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.004 INCHES |
| AEGA | LATERAL RUNOUT | 0.003 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.0 PERCENT, RATED AMPERES C AND BETTER FINISH |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | 0.15/+0.15 ALL SECTIONS |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| TEST | TEST DATA DOCUMENT | 05257-X900182 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TURRET |
