| MRC | Criteria | Characteristic |
|---|
| ABKW | OVERALL HEIGHT | 2.040 INCHES MINIMUM AND 2.060 INCHES MAXIMUM |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND SHOCK RESISTANT AND COLD RESISTANT AND HEAT RESISTANT AND EXPLOSION PROOF |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | 26 SINGLE MATING END |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 5.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 450.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRN | POLARIZATION METHOD | JACKSCREW |
| AFRV | CONNECTOR LOCKING METHOD | JACKSCREW-SOCKET |
| AGTX | CABLE OPENING LENGTH | 0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.086 INCHES |
| CQTM | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CQYH | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING AND COPPER SINGLE MATING END SINGLE CONTACT GROUPING |
| CSCF | TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| CSGF | CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,COMPOSITION 22,1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE II MIL SPEC SINGLE TREATMENT RESPONSE |
| CTHH | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-359 FED SPEC SINGLE MATERIAL RESPONSE |
| CXCL | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | 0.026 GOLD GRAINS, TROY |
| PRMT | PRECIOUS MATERIAL | GOLD |
| AAJD | THREAD CLASS | 2A AND 2B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAQL | BODY STYLE | HOOD, TOP OPENING W/CLAMP |
| ABHP | OVERALL LENGTH | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY |
| AFQW | MATING END QUANTITY | 1 |
| AFQZ | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRE | CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 700.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRT | SHELL TYPE | HOOD, TOP OPENING |
| AFRW | CONNECTOR CABLE STRAIN RELIEF METHOD | CABLE CLAMP |
| AGTY | CABLE OPENING WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AKMG | NOMINAL THREAD LENGTH | 0.110 INCHES |
| AWTN | OPERATING TEMP RATING | 55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 56 |
| CQTZ | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CQZG | INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE SINGLE MATING END |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TYPE II,CLASS 2 MIL SPEC 1ST TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING AND MIL-C-14550,CLASS 4 MIL SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CSPT | SHELL MATERIAL | ALUMINUM |
| CSWM | SHELL SURFACE TREATMENT | ANODIZE |
| CTKL | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-19833,TYPE GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| CXCG | INCLUDED CONTACT QUANTITY | 26 SINGLE MATING END SINGLE CONTACT GROUPING |
| PMLC | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| THSD | THREAD SERIES DESIGNATOR | UNC |
