| MRC | Criteria | Characteristic |
|---|
| AAJD | THREAD CLASS | 2A AND 2A |
| AAQL | BODY STYLE | STRAIGHT SHAPE W/FLANGE |
| ABHP | OVERALL LENGTH | 0.980 INCHES MINIMUM AND 1.105 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.660 INCHES MINIMUM AND 0.705 INCHES MAXIMUM |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.635 INCHES MINIMUM AND 0.672 INCHES MAXIMUM |
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY |
| AFQZ | CONTACT REMOVABILITY | NONREMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING |
| AFRF | CONTACT MAXIMUM FREQUENCY RATING | 18.0 GIGAHERTZ ALL MATING ENDS SINGLE CONTACT GROUPING |
| AFRY | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 ALL MATING ENDS SINGLE CONTACT GROUPING |
| AWTN | OPERATING TEMP RATING | 65.0 DEG CELSIUS MINIMUM AND 165.0 DEG CELSIUS MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 36 AND 28 |
| CQTZ | CONTACT MATERIAL | COPPER ALLOY ALL MATING ENDS SINGLE CONTACT GROUPING |
| CQZG | INSERT MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE ALL MATING ENDS |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TYPE II,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING |
| CSWM | SHELL SURFACE TREATMENT | PASSIVATE |
| CTHH | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A 582,TYPE 303,CONDITION A ASSN STD SINGLE MATERIAL RESPONSE |
| CXCG | INCLUDED CONTACT QUANTITY | 1 1ST MATING END SINGLE CONTACT GROUPING1 2ND MATING END SINGLE CONTACT GROUPING |
| PMLC | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | 0.010 GOLD GRAINS, TROY |
| AAJF | THREAD DIRECTION | RIGHT-HAND AND RIGHT-HAND |
| ABKW | OVERALL HEIGHT | 0.660 INCHES MINIMUM AND 0.705 INCHES MAXIMUM |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND MOISTURE RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT AND SHOCK RESISTANT |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AFQW | MATING END QUANTITY | 2 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | SMA 1ST MATING ENDTNC 2ND MATING END |
| AFRT | SHELL TYPE | SOLID |
| AFRV | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES AND 0.438 INCHES |
| CQYH | CONTACT SURFACE TREATMENT | GOLD ALL MATING ENDS SINGLE CONTACT GROUPING |
| CSGF | CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING |
| CSPT | SHELL MATERIAL | STEEL CORROSION RESISTING |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE IV FED SPEC SINGLE TREATMENT RESPONSE |
| CTKL | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | ASTM D 1457 ASSN STD SINGLE MATERIAL RESPONSE ALL MATING ENDS OR ASTM D 1710 ASSN STD SINGLE MATERIAL RESPONSE ALL MATING ENDS |
| CXCL | INCLUDED CONTACT TYPE | COAXIAL SOCKET ALL MATING ENDS SINGLE CONTACT GROUPING |
| PRMT | PRECIOUS MATERIAL | GOLD |
| THSD | THREAD SERIES DESIGNATOR | UNS AND UNEF |
