| MRC | Criteria | Characteristic |
|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAQL | BODY STYLE | ANGLE SHAPE W/CABLE CLAMP |
| ADAV | OVERALL DIAMETER | 1.156 INCHES MAXIMUM |
| ADMW | BODY ANGLE IN DEG | 90.0 |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | 14S-6,11-6 |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 200.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRN | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| AFRT | SHELL TYPE | SOLID |
| AFRW | CONNECTOR CABLE STRAIN RELIEF METHOD | CABLE CLAMP |
| AKEZ | DISTANCE FROM CENTERLINE TO CONNECTOR END | 2.625 INCHES MAXIMUM |
| AWTN | OPERATING TEMP RATING | -55.0 DEG CELSIUS MINIMUM AND 175.0 DEG CELSIUS MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.875 INCHES |
| CQTZ | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CQYH | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING AND NICKEL SINGLE MATING END SINGLE CONTACT GROUPING |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TYPE 2,GRADE C,CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING AND QQ-N-290,CLASS 2 FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CSPT | SHELL MATERIAL | ALUMINUM |
| CXCG | INCLUDED CONTACT QUANTITY | 6 SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCL | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | 0.006 GOLD GRAINS, TROY |
| AAJD | THREAD CLASS | 2B |
| AFQJ | CABLE ENTRANCE DIAMETER | 0.125 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY |
| AFQZ | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 22.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRE | CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 250.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRP | INSERT POSITION IN DEG | 0.0 |
| AFRV | CONNECTOR LOCKING METHOD | INTERNALLY THREADED COUPLING RING |
| AKFA | DISTANCE FROM CENTERLINE TO CABLE END | 3.188 INCHES MAXIMUM |
| AKMG | NOMINAL THREAD LENGTH | 0.290 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQTM | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CQZG | INSERT MATERIAL | RUBBER SILICONE CLASS Q SINGLE MATING END |
| CSCF | TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| CSWM | SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE AND NICKEL |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE |
| PMLC | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRMT | PRECIOUS MATERIAL | GOLD |
| THSD | THREAD SERIES DESIGNATOR | UNEF |
