Using the Request for Quote (RFQ) form provided on this page, you can request competitive procurement options on part number 3153407 with rapid responses always offered by our staff. To ensure that you locate and procure exactly what you need with ease, we list parts with as much information as we can. For example, part number 3153407 It is listed as Screw Tapping. component manufactured by Illinois Tool Works Inc, specifically under CAGE Code 83910. It is also accompanied by the NSN 5305014707020 for ease of organization, the first digits of the NSN indicating that the part belongs to FSC 5305 Screws.
NSN Information for Part Number 3153407 with NSN 5305-01-470-7020, 5305014707020
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-470-7020 Item Description: Screw Tapping | 5305 | 014707020 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3153407 | 5 | 2 | 3 |
Characteristics Data of NSN 5305-01-470-7020, 5305014707020
| MRC | Criteria | Characteristic |
|---|---|---|
| AASU | HEAD HEIGHT | 0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.305 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | RADAR |
| MATT | MATERIAL | STEEL COMP 1022 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| AATC | EXTENDED WASHER DIAMETER | 0.398 INCHES MINIMUM AND 0.432 INCHES MAXIMUM |
| CRGF | NONMACHINE THREAD STYLE | CONE POINT (TYPE BP) |
| AASB | FASTENER LENGTH | 1.2032 INCHES MINIMUM AND 1.2968 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | ITEM IS A SELF-TAPPING, REMOVABLE, CONCRETE ANCHOR WITH A SPECIALLY DESIGNED TWO LEAD THREAD, TWO THREADS OF UNEQUAL SIZE, LARGER DIAMETER THREAD IS NOTCHED AT INTERVALS ALONG ITS LENGTH TO FACILITATE TAPPING INTO MASONRY MATERIALS; A SPECIALLY-SIZED CARBIDE-TIPPED DRILL BIT IS SUPLIED WITH EACH BOX OF ANCHORS FOR HOLE PREPARATION; INSTALLATION HOLE SHOULDBE DRILLED TO NOT LESS THAN ONE-QUARTER INCH DEEPER THAN THE ANCHOR PENETRATION INTO THE MASONRY; THE FINISH HAS A PROPRIETARY SYNTHETIC POLYMER COATING; THE END ITEM IDENTIFICATION IS THE NEXT GENERATION RADAR (NEXRAD), WHICH IS USED BY THE NATIONAL WEATHER SERVICE (NWS) |
| AASK | HEAD STYLE | CHAMFER FLANGE |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| CTYF | NONMACHINE NOMINAL THREAD DIAMETER | 0.260 INCHES |
