Using the Request for Quote (RFQ) form provided on this page, you can request competitive procurement options on part number M39015-2-006XM with rapid responses always offered by our staff. To ensure that you locate and procure exactly what you need with ease, we list parts with as much information as we can. For example, part number M39015-2-006XM It is listed as Resistor Variable Wire Wound Non. component manufactured by Other Nsn, specifically under CAGE Code 81349. It is also accompanied by the NSN 5905014937855 for ease of organization, the first digits of the NSN indicating that the part belongs to FSC 5905 Resistors.
NSN Information for Part Number M39015-2-006XM with NSN 5905-01-493-7855, 5905014937855
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-493-7855 Item Description: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 014937855 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| M39015/2-006XM | 1 | 2 | 2 |
Characteristics Data of NSN 5905-01-493-7855, 5905014937855
| MRC | Criteria | Characteristic |
|---|---|---|
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.100 INCHES NOMINAL |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AAPN | SECTION QUANTITY | 1 |
| ABWV | SHAFT DIAMETER | 0.050 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.490 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 7TH SECONDARY QUALITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.100 INCHES NOMINAL |
| AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| ABTB | MOUNTING HOLE DIAMETER | 0.073 INCHES NOMINAL |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-PRF-39015/2 |
| SR-1 | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M39015/2-006XM |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| ABJT | TERMINAL LENGTH | 0.172 INCHES MINIMUM |
| ADAT | BODY WIDTH | 0.180 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| TEST | TEST DATA DOCUMENT | 81349-MIL-PRF-39015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS SINGLE SECTION |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE AND TERMINAL |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 1 |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-PRF-39015/2 GOVERNMENT SPECIFICATION |
| ADAU | BODY HEIGHT | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.080 INCHES MAXIMUM |
| SR-1 | MANUFACTURERS CODE | 81349 |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
